Razor HD Gen II 4.5-27×56 Riflescope is one of the leading riflescopes in the long range and precision shooting category. If you are a serious precision shooter, you will love to have this scope in your collection and if you’re going for a long distance hunt and looking for ‘deadly accuracy’, Razor HD Gen II 4.5-27×56 is the solution for you.
This scope comes with a magnification from 4.5x to 27x and an objective lens diameter of 56mm. It is 14.4 inches long and weighs 48.5 ounces. Tube size, Field of View, and Eye Relief of the optical device are 34mm, 25.3-4.4 feet/100 yards, and 3.7 inches respectively.
Razor HD Gen II 4.5-27×56 Riflescope comes with three kinds of reticle choices and measurements:
i. EBR-1C Reticle (MRAD)
It is a hashmarked ranging reticle that comes with MRAD-based subtension lines windage corrections, holdover, and ranging. It is specifically designed for long distance shooting. Ultra-precision laser etching can be found on glass reticle. Optimal balance between low light visibility and precision aiming is ensured by EBR-1C MRAD reticle.
ii. EBR-2C Reticle (MRAD)
Here, measurement of the the subtensions are measured in MRAD, which means that image of the reticle change will change in magnification. On drop lines, windage reference dots are included. This reticle type is based on MRAD or milliradian. In the first focal plane riflescope of Razor HD Gen II, listed mrad subtensions are valid at every level of magnification. This feature comes in handy during high range stress conditions. It is highly desirable of you to learn bullet drop numbers in MRADs instead of MOAs or even inches.
iii. EBR-2C Reticle (MOA)
The basic difference with the the former reticle type is the variation in measurement metric. Instead of MRAD, MOA measurement is used here. Here too the reticle size does not change with change in magnification. It comes with center crosshair subtensions and windage reference dots can be found on the drop lines.
Some essential specs of Razor HD Gen II 4.5-27×56 Riflescope are:
Razor HD Gen II 4.5-27×56 | Specification |
Maximum Elevation Adjustment | 33 MRAD |
Maximum Windage Adjustment | 14 MRAD |
Parallax Setting | 32 yards to infinity |
Adjustment Graduation | .1 MRAD |
Travel per Rotation | 10 MRAD |
Razor HD Gen II 4.5-27×56 scope comes with wide array of features including:
i. This scope comes with different kinds of optical features including illuminated reticle, reticle placed in the First Focal Plane, Plasma Tech, XRPlus Fully Multi-Coated lens for superior light transmission, HD Lens elements, and optimally indexed lenses.
ii. This optical device has single piece tube made up of aircraft-grade aluminum body. Some of the other important features of the optical device are presence of side focus, locking illumination, external rotation indicator, L-Tec Turrets, ArmorTek technology for scratch resistance, hard anodized, stealth shadow finish, shock-proofing, fog-proofing, and waterproofing.
iii. There are some important internal mechanism design features present in Razor HD Gen II 4.5-27×56 scopes and they are Erector Tube System, Turret Screws, patented Friction Reduction System, Micro Adjust Zero Setting, and L-Tec Zero Stop. These features make this scope one of the most sought after riflescopes in long range shooting. For convenience of consumers, Vortex Optics has equipped its Razor HD Gen II scopes with easy lockable illumination dial and fast focus eyepiece.
Buy Razor HD Gen II 4.5-27×56 scope
While buying the scope from Scopelist.com, don’t forget to check whether the box comes with lens cloth, CR2032 battery, 2mm hex wrench, and 4-inch sunshade. Availability of VIP Unconditional Lifetime Warranty makes the deal sweeter because it gives you completely transferable Unlimited Lifetime Warranty and additionally you don’t have to hang on to any receipt or warranty card.
Do have a look at Vortex Razor HD Gen II Rifle Scope at Scopelist before buying!
Pingback: cm80t54te9tehfgdcfgs